-
型の定形良い表面の構造のためのブラウン色のエポキシ樹脂工具細工ののり
Master Models Tooling Paste Epoxy Resin Materials Packing 10kg 15kg 20kgs Product main properties This product is a two-component materials, by automatically output device fast coating model, single coating thickness can be up to 40 mm, reaction put the quantity of heat low, coating and processing when no smell, room temperature curing can be carried out after a day of machining, machining performance is good, good surface effect, material size stability is good Characteristi
-
エポキシ樹脂 マスター モデルのための用具ののり50-55D密度0.5G/Cmの3硬度のピンク
50-55D Density 0.5 g/cm 3 Hardness Pink Color Tooling Paste For Master Model APPLICATION: ● Master model ● Manufacturing sample ● Automotive design modeling PHYSICAL PROPERTIES Type Color Mixratio Working time Gel time Cured time LH 5300A (resin) Brown 1 20-30Min 40 Min 24 Hour LH5300B (hardener) White 1 CURED PARAMETER Type LH 5300 A/B Color Brown Density(ISO 1183) 0.50g/cm3 Cured Hardness (ISO 868) 50-55shore D Thermal expansion coefficient (ISO 11359) 55-60 x 10-6K-1
-
マスター モデルのための50-60D硬度のピンク色の用具ののり
50-60D Hardness pink Color Tooling Paste fit to Master model APPLICATION: ● Master model ● Manufacturing sample ● Automotive design modeling PHYSICAL PROPERTIES Type Color Mixratio Working time Gel time Cured time LH 0500A (resin) Pink 1 20-30Min 40 Min 24 Hour LH0500B (hardener) White 1 CURED PARAMETER Type LH 0500 A/B Color PINK Density(ISO 1183) 0.5-0.60g/cm3 Cured Hardness (ISO 868) 50-60shore D Thermal expansion coefficient (ISO 11359) 55-60 x 10-6K-1 Thermal deformation
-
自動点検の据え付け品のための65MPa強さ1.1g/Cm3の用具ののり
Tooling Paste can be processed for auto checking fixture PHYSICAL PROPERTIES Type Color Mix ratio Working time Gel time Cured time LH1000A (resin) Beige 1 40-50 Min 60Min 24 Hour LH1000B (hardener) White 1 CURED PARAMETER Type LH 1000 A/B Color Beige Density(ISO 1183) 1.0-1.1g/cm3 Cured Hardness (ISO 868) 70-75shore D Thermal expansion coefficient (ISO 11359) 50-55 x 10-6K-1 Thermal deformation temperature(ISO 75) 60-65℃ Compressive strength (ISO 604) 60-65 MPa Specifications
-
自動車模倣のためのベージュ色のエポキシ樹脂用具ののり
70-75D Hardness beige Color Tooling Paste fit to Automotive design modeling APPLICATION: ● Master model ● Manufacturing sample ● Automotive design modeling Type Color Mix ratio Working time Gel time Cured time LH1000A (resin) Beige 1 30-40 Min 40 Min 24 Hour LH1000B (hardener) White 1 CURED PARAMETER Type LH1000 A/B Color beige Density(ISO 1183) 1.0-1.1g/cm3 Cured Hardness (ISO 868) 70-75shore D Thermal expansion coefficient (ISO 11359) 55-60 x 10-6K-1 Thermal deformation
-
マスター モデルのための70-75D硬度のブラウン色の用具ののり
Epoxy Laminating Resin 70-75D Hardness brown Color Tooling Paste fit to Master model APPLICATION: ● Master model ● Manufacturing sample ● Automotive design modeling Type Color Mix ratio Working time Gel time Cured time LH1000A (resin) Light Brown 1 20-30 Min 40 Min 24 Hour LH1000B (hardener) White 1 CURED PARAMETER Type LH1000 A/B Color Brown Density(ISO 1183) 1.0-1.05g/cm3 Cured Hardness (ISO 868) 70-75shore D Thermal expansion coefficient (ISO 11359) 55-60 x 10-6K-1 Thermal
-
ヨットのモデル/基準のモデル作成のための工具細工ののりを模倣しているブラウン
Brown Modeling Tooling Paste Epoxy Resin Materials Packing 10kg 15kg 20kg Product operation process Given according to the proportion of fully mixing thoroughly, the same color. Try to avoid to produce bubbles, it is best to use vacuum mixer mixing. Strict control, with a thick layer of a coating is not more than 40 mm;If upset, after waiting for curing the second floor. The after curing processing, performance is better. (after curing: 80 ℃ + 8 h or 3 days) at room
-
型の製造業の工具細工ののりのエポキシ樹脂物質的で高い次元の正確さ
Beige Modeling Tooling Paste Epoxy Resin Materials Packing 10kg 15kg 20kg Product introduction This product is a two-component epoxy resin imported raw materials, after mixing, apply on the surface of model, after curing on nc machining can be processed into the required model, according to different design requirements for glue, curing content has excellent machining performance, milling, planing, cutting, drilling, and other processing, without a bit wear in the processing,
